The production of high-speed injection molding machine is a very complex process; In the production process of the manufacturer, many temperatures need to be paid attention to. These temperatures have a great impact on the product settings, which is a key factor. stay High speed injection molding machine In the production process of, the following temperatures should be paid attention to: material temperature, oil temperature and mold temperature.

In the production process of high-speed injection molding machine, due to the continuous movement of the equipment, the hydraulic oil in the equipment will constantly rub against each other, generating more and more heat, which will raise the oil temperature. Therefore, during the production process, the oil temperature should be checked in time to keep the oil temperature at about - 45 ℃. If the oil temperature is too low or too high, the pressure transmission of the system will be affected and normal production will be affected.

The material temperature is also a problem that needs attention. The material temperature is what we usually call the barrel temperature, which is generally determined according to the specific requirements of the materials and products used. During the production of high-speed injection molding machine, the material temperature changes with the different production requirements, which needs to be adjusted in time, but cannot exceed the temperature required by the standard. In addition, cycles and materials need to be considered.

Mold temperature is also high injection molding machine Important reference temperature and parameters in production. The mold temperature has a great influence on the shaping and compliance of products. Therefore, when setting the mold temperature, we must consider the product factors, not just the temperature requirements, which will affect the normal and orderly progress of each process, and the product compliance rate will be very low.