What are the dimensions and production process of the injection molding machine? injection molding machine The size of shall not only meet the requirements of use and installation, but also take into account the mold manufacturing, equipment performance and raw material flow. Strictly control the factors affecting the precision of injection molded parts, including mold manufacturing precision, plastic composition and process conditions.
The surface roughness of injection molding is determined by the surface roughness of the mold, so the surface roughness of the mold is one level lower than the surface roughness of the product. The requirements are met through grinding and polishing. Cooling the injection parts in the cavity of the shrinkage mold will make it difficult to disassemble the injection parts. Therefore, in order to facilitate demoulding, It shall also be considered that the internal and external surfaces parallel to the demoulding direction have sufficient demoulding slope.
Injection molding is a molding method of injection mold. The advantages of injection molding are fast production speed, high efficiency, automatic operation, various colors, size from large to small, easy to change product size, and complex shape; Parts and injection molding are usually used for batch production of complex shape molding and processing.
Injection molding is a highly technical and practical industry. In the injection molding process, the use of plastic raw materials, pigments, nozzles, molds, injection molding machines, peripheral equipment, fixtures, sprayers, various auxiliary materials and packaging materials has brought great results to the management of the injection molding workshop. Compared with other industries or departments, there are certain difficulties and higher requirements for managers at all levels in the injection workshop.
Although the structure of the mold may vary depending on the type and performance of plastics, the shape and structure of plastic products, and the type of injection molding machine, the basic structure of the mold is the same. The mold is mainly composed of gating system, temperature control system, mold parts and structural parts. Unlike plastics and products, the gating system and mold are in direct contact with plastics. They are more complex and changeable in the mold, and require high-precision parts.
High speed injection molding machine Injection molding requires 24 hours of continuous work, usually in two or three stages; The injection workshop has a variety of posts and divisions, and different posts have different skill requirements. In order to ensure the smooth production and operation of the injection molding workshop, it is necessary to operate and coordinate the management of personnel, materials, equipment and tools involved in all links, including the raw material room, waste room, dispensing room, production site, post-processing area, production room, semi-finished product area, office, etc.
The above is the relevant knowledge about injection molding machine size and production process, do you still remember?
