How to prevent the hammer from getting stuck when die-casting machine is die-casting? With the surge in demand for die-casting parts, Die-casting machine Must operate for a long time; It is found that both beginners and skilled people often encounter some difficulties when using industrial equipment for die-casting, in which hammer jamming is a common fault that is often very easy to encounter. How to prevent hammer jamming?

In order to prevent the die-casting machine from jamming the hammer in the whole die-casting process, we can start from the following two points:

1、 For die-casting products, the temperature of industrial equipment, especially the hammer head and barrel, can be checked frequently. Once it is found that the temperature is too high, some effective measures must be taken to reduce the temperature. Once the temperature of the hammer head and the driller barrel exceeds the effective range, the hammer head is very easy to get stuck.

2、 For die-casting products, pay attention to selecting high-quality die-casting alloy products, and do not infiltrate residues into raw materials; In order to prevent the residue from adhering to the hammer head of the die-casting machine, causing the hammer head to be stuck.

In order to ensure the die-casting machine can work normally and smoothly, we must also pay attention to:

1. In the process of die-casting hot mold, liquid aluminum alloy can be used to die-casting hot mold 5-10 molds at a lower rate, and then all normal semi-solid aluminum alloy and its semi-solid die-casting can be used for die-casting. The purpose of this is to better maintain the mold shell and prevent the occurrence of flying materials in the whole process of die-casting.

2. In order to better prevent the impact of data signal RF connector and transfer car relay during operation, which may lead to data signal errors and accidents, attention must be paid to data signal RF connector and transfer car relay; After the actual operation, be sure to turn off the main power switch and disconnect the switching power supply.

according to Large die-casting machine The cause of hammer jamming in the whole process can be properly prevented. It is expected that the actual operation staff will pay attention to several die-casting production and processing rooms to improve the service life of die-casting machines.