because Small injection molding machine The position and direction of the injection part and the clamping part are different, which can be divided into Horizontal injection molding machine , vertical injection molding machine and angle injection molding machine. Next, Liansheng Precision will introduce their advantages and disadvantages

1、 Horizontal injection molding machine

The machine has good stability, low body and convenient maintenance and operation. Therefore, horizontal injection molding machine is widely used, which is applicable to small, medium and large injection molding machines. It is the basic form of injection molding machines at home and abroad.

2、 Vertical injection molding machine

Small floor area, convenient disassembly and assembly of mold, and convenient placement of inserts. The disadvantage is that the machine body is relatively high, the stability of the machine is poor, and the feeding is inconvenient. The plastic parts are usually taken out manually after demoulding. It is not easy to realize full automatic operation. Therefore, this form is mostly used for small production injection molding machines with small injection volume.

3、 Angle injection molding machine

The axis of the injection molding device and the axis of the clamping device form an included angle of 90 degrees. Therefore, the advantages and disadvantages of the angle injection molding machine lie between the horizontal injection molding machine and the vertical injection molding machine. It is also commonly used in medium and large production injection molding. It is especially suitable for molding plastic parts that are not allowed to leave traces, because when horizontal injection molding machines or vertical injection molding machines are used to mold plastic parts, the mold is designed as a multi cavity or a cavity offset from one side. However, this is often limited by the size of the injection molding machine template. In this case, the angle injection molding machine does not have this problem, because the molten material enters the mold cavity along the parting surface of the mold.

That's it Small injection molding machine I have shared the types, advantages and disadvantages of the content. I hope the above content can help you,