High speed injection molding machine The machine adjustment process needs to be operated in strict accordance with the equipment operation manual, and the specific steps are as follows:

1、 Preparation: Before adjusting the high-speed injection molding machine, the equipment needs to be inspected and maintained to ensure that it is in normal working condition. At the same time, it is necessary to prepare the required injection materials and molds.

2、 Start machine adjustment: start the high-speed injection molding machine and operate according to the equipment operation manual. First, heat and preserve the temperature, add the injection raw materials to the hopper, and set appropriate injection parameters, including injection speed, pressure, temperature, etc.

3、 Adjust parameters: during the injection molding process, adjust the injection speed, pressure, temperature and other parameters according to the actual situation to achieve a good injection effect. It should be noted that the parameters should be adjusted gradually, and proper mold testing operations should be carried out to ensure the quality and stability of injection products.

4、 Mold test: during the machine adjustment, mold test operation is required to verify whether the size, appearance, material fluidity and other parameters of the injection products meet the requirements. If problems are found, they need to be adjusted and improved in time.

5、 Complete the machine adjustment: after the injection molding products reach the expected quality and output, stop the work of the high-speed injection molding machine, and carry out cleaning and maintenance. It should be noted that the cleaning and maintenance should be carried out in accordance with the equipment operation manual to ensure the safety and stability of the equipment.

Injection molding machine manufacturer Here we remind you that the adjustment process of the high-speed injection molding machine needs careful and rigorous operation, and the operation should be carried out according to the operation manual of the equipment. At the same time, mold testing and adjustment should be carried out to achieve good injection molding effect and production efficiency.