Company Dynamics and Exhibition Information - Guangdong Liansheng Precision Intelligent Equipment Technology Co., Ltd

How to select injection molding machine manufacturers?

2022-03-12

How to select injection molding machine manufacturers? What problems should be paid attention to when purchasing vertical injection molding machines? The following four standards are shared by Guangdong Liansheng Precision Editor for your reference: 1. Whether the vertical injection molding machine has relevant product certificates and national authoritative quality certification, all of which have CE certification and strict production standards. 2. Choose a brand with good reputation. Do not purchase models based on price. You should refer to the price and machine configuration of your product. 　　3。 Whether the production technology of important parts is advanced. Some parts are usually the core parts of the machine, such as hydraulic pump, hydraulic motor, hydraulic valve, etc

View details+
Precautions when using injection molding machine

2022-02-23

Precautions when using the injection molding machine. The injection molding machine can complete the injection molding operation, but when the staff uses it, they should also pay attention to the following points, so as to ensure the safety of the production process and personal safety.

View details+
What is the process of starting the injection molding machine

2022-01-28

What is the process of starting the injection molding machine? If the process of starting the injection molding machine is not standardized, it will lead to poor mass production, short machine life, quality decline and other conditions. The operator must be familiar with the function of each switch button on the equipment operation panel, and operate in strict accordance with the operating procedures and precautions. Next, I will explain to you the process of starting the injection molding machine. Teach you to standardize the process

View details+
Have you done the maintenance of the four major parts of the injection molding machine

2022-01-25

Have you done the maintenance of the four major parts of the injection molding machine

View details+
How to deal with weld lines during injection molding?

2022-01-22

How to deal with weld lines during injection molding? The main reasons for weld lines are: when molten plastics meet inserts, holes, areas with inconsistent flow rate or areas with interrupted filling material flow in the cavity, multiple strands of melt converge; In case of gate injection mold filling, the material cannot be completely started from --. Next, we will share the specific causes of weld lines and corresponding solutions. Low temperature molten materials have poor shunt and convergence performance, and are easy to form weld lines. If the internal and external surfaces of the plastic parts have weld lines at the same position, it is often due to poor welding caused by low material temperature. In this regard, the barrel and nozzle temperature can be properly increased or

View details+
How to select injection molding machines

2022-01-18

How to select injection molding machine? Generally speaking, before selecting the specification and model of the injection molding machine, first check the performance parameter values of the injection molding machine in the product instruction provided by the manufacturer of the injection molding machine. These parameter values represent the main performance characteristics of the injection molding machine. According to some technical requirements of the plastic products to be produced, such as the variety and trademark of the materials used for the products, the quality (weight) and shape standards of the products, etc. Find the parameter values in the instruction book that are close to them. The model of the injection molding machine corresponding to these parameter values is the injection molding machine to be purchased. At the same time, we should also know that the operation precision, speed and product precision of the injection molding machine to be purchased are equal

View details+
What to do if the oil temperature of the injection molding machine is too high?

2022-01-13

What is an injection molding machine? What to do if the oil temperature of the injection molding machine is too high? Injection molding machine is also called injection molding machine or injection molding machine. It is the main molding equipment for making thermoplastic or thermosetting materials into plastic products of various shapes with plastic molding molds. It is divided into vertical type, horizontal type and all electric type. The injection molding machine can heat the plastic and apply high pressure to the molten plastic to make it eject and fill the mold cavity. Solution to the problem of high temperature of the injection molding machine: (1) According to different load requirements, check and adjust the pressure of the overflow valve regularly to make it just right. (2) Select the hydraulic oil reasonably, especially the oil viscosity, and try to lower it if conditions permit

View details+
Review of the Annual Meeting | Set Sail to Create Brilliance Together

2021-01-15

In the twinkling of an eye, the busy 2019 has passed, and the expectant 2020 is coming to us. On January 15, 2020, the company held a grand Spring Festival dinner with the theme of "Sailing, Creating Brilliance Together", and all employees gathered together. 2020 is the 15th year of Liansheng Machinery. Over the past 15 years, Liansheng has provided stable, durable, precise and efficient high-quality products for its customers with the service concept of "meeting customer needs, one-stop solution". Here, thanks to the customers who give us service opportunities! In the next 15 years, I hope all the staff will work together to become more brilliant!

View details+
Create excellent team and create enterprise brilliance | Liansheng Company outdoor expansion activities

2020-08-01

With the joint efforts of all departments, the ERP project of Liansheng has been successfully launched! To thank the colleagues of the ERP project team for their hard work during the system launch, and to further strengthen the team awareness and cooperation spirit among colleagues, the company specially organized the project team members to carry out an outdoor expansion activity!!!

View details+
Liansheng Die Casting will meet you in July at the 14th China International Die Casting Exhibition in Shanghai!

2020-07-10

The 14th China International Die Casting Conference and Exhibition will be held in Shanghai New International Expo Center (Gate 4, Huamu Road, No. 2345, Longyang, Pudong New Area, Shanghai) from July 17 to 19, 2019. This time, Liansheng Die Casting Technology Co., Ltd. will bring a new generation of LS400 servo energy-saving die-casting machine, peripheral units and Gi Tang Line to the scene to show you the integration effect of the die-casting unit workshop. At that time, please visit the "Liansheng Die Casting" booth for visit, guidance and negotiation. Booth No.: Hall N2 No. B21 New generation LS series die-casting machine Performance characteristics: Liansheng focuses on the fine design of die-casting equipment, sophisticated technology, through continuous technological innovation

View details+

2022-03-12

2022-02-23

2022-01-28

2022-01-25

2022-01-22

2022-01-18

2022-01-13

2021-01-15

2020-08-01

2020-07-10