Precautions when using the injection molding machine. The injection molding machine can complete the injection molding operation, but when the staff uses it, they should also pay attention to the following points, so as to ensure the safety of the production process and personal safety.

If the temperature of the injection molding machine rises, the damage caused to us in this case is still very much. For example, it can make the machine deform. If the thermal expansion coefficient of the hydraulic part is different, its gap will also change accordingly , In this way, there may be system action failure, and the accuracy of the hydraulic system's own transmission will naturally affect the quality of the machine's work.

The increase of temperature will make the viscosity of oil decrease. If such a situation occurs, Then it will reduce the function of all injection molding machine systems. As the viscosity decreases, the wear degree of the parts in the lubrication part will also increase greatly, which will aggravate the wear. High temperature will damage parts of rubber structure. Because if the temperature is too high, the aging speed of rubber will accelerate, so its sealing function will decline, and its service life will also decline, and leakage will occur. The high temperature may also be caused by the blockage of the pipe, such as the blockage of the filter screen and the cooling tower.

High temperature brings many problems. So when the staff is handling - We must avoid such problems and deal with them in time if they occur. In our normal operation of the machine, we also need to pay attention not to remove various safety equipment. If there is any fault or accident with the safety equipment, the machine needs to be closed. Before restarting the injection molding machine, - Make sure that the fault has been cleared.

The above is an introduction to the use of injection molding machines, and I hope it can help you