Xiamen International Trade Fair (TAIFEX) is the largest and most influential brand exhibition in the industrial field on both sides of the Taiwan Strait. The exhibition has always adhered to internationalization, specialization and marketization, built a high-end intelligent manufacturing exhibition platform integrating "brand display - technical exchange - on-site customization", focused on displaying the latest equipment and top technologies of the current manufacturing industry, released the latest industry information, held a series of activities such as cross-strait economic and trade forum, and built a stage space for closer cross-strait industrial cooperation.

Exhibition time: April 12-15, 2017

Exhibition address: Xiamen International Convention and Exhibition Center

Joint lifting position: C4163

Exhibition models: GT2-LS280BT, GT2-LS90E, LS300

Display machine: GT2-LS280BT

Cycle 6.6, product weight 6g, 6.7S, one out of four aviation cups, production qualification rate 99%

1. The control system imported from Germany improves the control accuracy, reduces the vibration of the whole machine, and makes the machine run more smoothly and reliably.

2. The new single cylinder structure increases the response speed by 20%, and 45% when accelerating from 0 to the maximum firing speed;

3. The maximum firing rate of the whole series reaches 320mm/s, 40% higher than that of the second generation;

4. Further strengthen the rigidity of the whole formwork according to the requirements of thin-walled packaging mold;

5. Strengthen proportional mold opening and locking control, more accurate mold opening position;

6. Servo system, more power saving

　　 Display machine: GT2-90E glasses special injection molding machine

30S one out one glasses special injection molding machine, PEI material, production qualification rate 100%

Shooting platform

1. Adopt efficient and accurate single cylinder glue injection structure;

2. High efficiency plasticizing screw for glasses;

3. Low resistance and efficient injection system;

4. The shooting table is guided by linear guide rail, with low friction resistance, high positioning accuracy and rapid response;

5. Mobile hopper;

Mode locking part

1. High rigid mold locking design;

2. Widening machine hinge to reduce pin shaft and steel sleeve wear;

3. Accurate gear mold adjustment;

4. The three plates are optimized through finite element analysis, so that the stress is more reasonable and the stress concentration is reduced;

5. High tensile alloy pull rod;

Hydraulic system

1. The main hydraulic parts are imported brands, such as vickers, yuken, rexroth, etc;

2. Variable pump energy-saving hydraulic system is adopted, and servo energy-saving hydraulic system is optional;

3. Hard pipe joints and high-strength high-pressure hoses are used at pipeline connections to reduce oil leakage and weld contamination;

4. The hydraulic system is designed to respond quickly, and the control valve block is arranged close to each action to reduce the pipeline;

Electric control part

1. Hongxun controller and 8 "LCD are adopted;

2. Intelligent control alarm system, safe and reliable machine control;

3. Perfect quality management function;

4. Automatic clearing and mold adjustment function;

other

1. High rigid frame design improves the stability of machine operation;

2. The profile welding frame type safety door is designed for safety protection.

　　 Display machine: cold chamber die-casting machine LS300

1. Higher response and more stable injection system;

2. Multi point setting, multi section control, wide range of injection parameter adjustment, strong adaptability;

3. The injection and pressurization circuits are designed independently to eliminate interference and improve injection stability;

4. Strong and durable reinforced design formwork and elbow system;

5. Ultra fast mold locking technology can effectively shorten the production cycle and improve production efficiency;

6. Double hydraulic cylinder top system, evenly ejected;

7. Optional automatic clamping force adjustment;

8. The interfaces of various peripheral equipment are standard, which can provide customers with complete die-casting units