2023-01-19
Generally speaking, the circuit board of the injection molding machine has good reliability and low failure rate. Generally speaking, when checking the injection molding machine, do not doubt the board first. Repeated testing can usually be eliminated by removing the pull, initialization, cold start and hot start PLCs. Pay attention to scratches, missing parts, looseness, etc., whether the movement of the mold to the sliding plate is true, whether there is leakage at the water channel and gas pipe joints, whether the mold opening is restricted, and whether the mold should also be marked. If the above actions can be completed before the formwork hanging, the problems found in the formwork hanging process and the waste of working hours caused by demoulding can be avoided. In the work of injection molding machine, it becomes much easier, so plastic processing equipment is widely used
